Filter
Top Products
3-6 Using
• Managing the Projectors
: Using the icons in the <Projector List> (only applicable to 'V'-marked projectors in the monitoring window)
(Refresh): Updates the status of the projector.
(Power On): Turns on the power of the projector.
(Power Off): Turns off the power of the projector.
(Switch Source): Selects a source from HDMI, S-VIDEO, AV, PC, MP.
(Blank Off/Blank On): Turns the screen of the projector on or off.
(Mute Off/Mute On): Turns the sound mute on or of.
(Adjust Aspect Ratio): Adjusts the aspect ratio of the projector to either 16:9 or 4:3.
If the connected source does not have the <Media Play> feature, <MP> is not available in the Source list.
Temperature status
The projector's internal temperature is
normal.(little bit high)
None. It's normal.
Temperature status
The projector's internal temperature is
higher than the limit.
Refer to Action 2 in Clearing Indi-
cator Problems.
Temperature status
The projector's internal temperature is too
high. The projector is turned off automati-
cally.
Refer to Action 3 in Clearing Indi-
cator Problems.
ICONS STATUS STATE ACTION