Filter
Top Products
# Installing the Camera using the Mount-Corner
●
Choose an installation site that can sufficiently support 5 times the weight
of the equipments to be installed.
●
Place the mount-corner to the corner to which you want to install the
camera and mark screw holes with a pencil (indicated by the blue
circles in the illustration). Drill a pilot hole for each pencil mark (5mm in
diameter and at least 35mm in depth), and then fully insert the supplied
plastic anchors (HUD 5) into them.
●
Install the mount-corner by aligning the four holes of the mount-corner to
the holes of the plastic anchors, and then fastening the screw-tappings
(BH M3 X 30).
17
E
SCREW-
TAPPING
(BH M3 x 30)
SCREW-
TAPPING
(BH M3 x 30)