Filter
Top Products
2) Passing the cables through the hole on the mount-corner.
Pass the cables through the hole on the mount-cornder as shown in the
right picture below.
●
Assemble the case-rear onto the moun-tcorner by aligning the two holes
of the case-rear to the protrusions of the mount-corner (indicated by the
blue circles in the illustration) and fastening the screw-tappings
(PH M3 X 16).
19
E
SCREW-TAPPING
(PH M3 x 16)
SCREW-TAPPING
(PH M3 x 16)