Filter
Top Products
& AUTO
●
This monitor normally will be in AUTO mode, which means it switches cameras
automatically.
●
Press this button if you want to rescan camera port. This monitor will
automatically skip the cameras that are not connected, and the ALARM mode is
automatically activated in AUTO mode.
* CAMERA SELECT(C1~C4)
●
If you want press any camera selector button, this monitor goes into manual
mode. Press AUTO button if you want to return to auto mode.
( ALARM/TIME
●
ALARM : Press this button if you wish to enable or disable an alarm. Initial
mode of monitor is alarm enable mode.
(Red LED on : Alarm enabled)
●
TIME : Sequencing time(1 to 10 seconds) can be adjusted with this knob.
Go on pressing time button and press .
Ex) if you go on pressing time button and press 1S, 2S, 3S, the
switching time of screen will be 6 second.
✳ The alarm function does not work for max 1 minute after turning on the camera.
) SCREEN ON/OFF
●
Turn the monitor screen ON/OFF. Even if the monitor is off, the system still
works for recording. Vertical spot line can be shown when turn off this switch.
1 POWER LED
●
MAIN Power LED.
2 SPEAKER
3 MICROPHONE
28