Filter
Top Products
●
Adjust the direction of the lens.
1) Use the cross (+) screw driver to turn the screw (indicated by the arrow
in the illustration) counterclockwise slightly.The lens body will move.
2) Tilt the lens body down about 10° from the horizontal, and then turn
the screw clockwise to fasten it.
●
Assemble the assy-case front onto the caserear as shown in the
illustration. Fasten the assy-case front to the case-rear with thescrew
(BH M2.6) you removed earlier.
20
Screw
CASE-REAR
Screw (BH M2.6)
ASSY-CASE
FRONT