Sanyo 1080HD Projector User Manual


  Open as PDF
of 60
 
33
To store the adjusted data, select Store and press the Point 8 or
OK buttons. The User Image Mode Menu appears. Use the Point
ed buttons to choose one of the five (5) user image modes and
press the Point
8 or OK buttons. A confirmation box appears.
Select [Yes] and then press the OK button.
To exit the User Image Mode Menu, go to the Quit icon and press
the Point
8 or OK buttons. The stored data can be called up by
selecting “User image 1 – 5” in the Image Mode Selection on
page 27.
Store
To reset the adjusted data, select Reset and press the Point
8 or
OK buttons. A confirmation box appears. Select [Yes] and then
press the OK button. All adjustments return to their previous
figures. You can also reset the adjusted data by pressing the
RESET button on the remote control.
Reset
Press the Point 8 or
OK buttons to store the
adjusted data. The User
Image Mode Menu
appears.
✔Note:
•Ifyouchangetheimagemode(seepage27)orturnoffthe
POWERwithoutstoringadjustedsettings,alltheadjustedsettings
willbereset.
•Whenresetting,theadjusteddatainAdvancedmenuwillbereset
whetherornotAdvancedmenuintheSettingMenuis“On.”See
page37.
Quit
Press the Point
8 or OK buttons
to exit the User
Image Mode
Menu.
Image Adjustment
Choose one of the five (5) user
image modes with the Point
ed
buttons and press the Point
8 or
OK buttons. The confirmation box
appears.
Select [Yes] and then press the
OK button.
 previous next