Sanyo PLC-XT21 Projector User Manual


 
15
Part Names and Functions
Remote Control
!9
!5
!3
!4
!8
!6
!7
@0
!3 MENU button
Open or close the On-Screen Menu (p.27).
!6 ZOOM ed buttons
Zoom in and out the images (p.31).
!5 D.ZOOM button
Select the Digital zoom +/- mode and resize the
image (p.51).
@0 FOCUS button
Adjust the focus (p.31).
!8 MUTE button
Mute the sound (p.30).
!4 P-TIMER button
Operate the P-timer function (p.32).
@1 NO SHOW button
Temporarily turn off the image on the screen (p.32).
@2 KEYSTONE button
Correct keystone distortion (p.32).
@6 SELECT button
Execute the selected item (p.27).
Expand or compress the image in the Digital
zoom mode (p.51).
!7 LASER button
Operate the Laser pointer function. Laser beam
is emitted while pressing this button for one
minute. When using the laser pointer for more
than one minute, release the LASER button and
press it again (p.16).
Display the Pointer on the screen (p.16).
!9 RESET/ON/ALL-OFF switch
When using the remote control, set this switch to
“ON.” Set it to “ALL OFF” for power saving when
it is not in use. Slide this switch to “RESET” to
initialize the remote control code or switch the
Spotlight and Pointer to the Laser pointer function
(pp.16–17).
@5 R-CLICK button
Acts as the right mouse button for wireless mouse
operation (p.17).
@3 LENS SHIFT button
Select the Lens Shift function (p.31).
@4 SCREEN button
Select the screen size (p.31).
@6
@7
@7 NUMBER buttons
Act as number buttons. Use these buttons when
setting the remote control codes (p.17) or when
entering the PIN code numbers (pp. 25, 56–57,
60–61).
@3
@2
@1
@4
@5
For PIN code
and remote
control code.