Sanyo PLC-XT21 Projector User Manual


 
36
Input Selection
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the AV System Menu icon.
1
Video System Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
2
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to the
desired system and press
the SELECT button.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Auto
AV System Menu icon
The selected system is
displayed.
Move the pointer to the
desired system and press
the SELECT button.
AV System Menu icon
The selected system is
displayed.
Note:
•The AV System Menu cannot be selected when selecting RGB
(Scart).