Sanyo PLC-XT21 Projector User Manual


 
37
Computer Adjustment
Adjust the computer screen.
This projector has various types of signal formats to automatically tunes to most
computers. With these signal formats in the projector and the Auto PC Adjustment
function, no special setting is required and you can enjoy the images in computers
just by connecting the computer to the projector.
If you need to adjust the computer screen, adjust the setting by following this
chapter. You can also store the adjusted parameters in the projector and call them up
later when needed. Maximum 10 memory areas (Mode 1–10) are available.
*Some adjustments may not available with the digital video signals (AV HDCP) input.
HELPFUL HINTS!
We frequently receive inquiries about computer connections. If the computer screen
is not displayed properly, check the following matters once again.
Is your computer cable connected to the projector’s INPUT 1 or INPUT 2
terminals properly?
Are the projector’s input terminal and the connected computer signal selected
properly with the INPUT 1 or INPUT 2 buttons on the remote control or by the
On-Screen Menu?
Is the signal correctly output from your computer? Many of the laptop computers
need to change the setting for monitor output when connecting to the projector.