Sanyo PLC-XT21 Projector User Manual


 
60
Change the PIN code lock setting
Use the Point 7 8 buttons to
switch between the options.
Use the Point 7 8 button to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point d button.
Press the SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
Use the Point ed buttons or Number buttons on the
remote control to enter a number. Press the Point 8
button to fix the number and move the red frame pointer
to the next box. The number changes to “.” If you fixed
an incorrect number, use the Point 7 button to move the
pointer to the number you want to correct, and then enter
the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the
correct PIN code all over again.
Setting
PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off............ Unlocked.
On1 .......... Enter the PIN code every time turning on
the projector.
On2 .......... Enter the PIN code to operate the projector
once the power cord is disconnected; as
long as the AC power cord is connected,
the projector can be operated without a PIN
code.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The “1234” is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box appears.
Enter a PIN code by following the steps below.
PIN code lock
When the projector is locked
with a PIN code, the PIN code
lock symbol appears on the
menu bar.
Enter a PIN code
After a correct PIN code is
entered, the following dialog
box appears.