Filter
Top Products
8. Specifications
119
Configuring Network Settings
The Network Settings screen is displayed as follows:
http:// <the projector's IP address> /lanconf.html
Domain
Host Name: Type in a hostname. Up to 60 alphanumeric characters can be used.
Domain Name: Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be used.
Apply: Click to reflect the entries.
Mail
Alert Mail: Click “Enable” to enable Alert Mail feature. This option notifies your computer of an error message via e-mail
when using wired LAN. The error message will be notified when the projector lamp has reached the end of its usable life or
an error occurs in the projector.
Sender's Address: Specify the sender’s address. Up to 60 alphanumeric and symbols, characters can be used.
SMTP Server Name: Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric characters
can be used.
Recipient's Address 1 to 3: Type in your recipient's address. Up to 60 alphanumeric and symbols characters can be
used.
Apply: Click to apply the settings.