Filter
Top Products
i
To the Owner
Before installing and operating the projector, read this
manual thoroughly.
The projector provides many convenient features and
functions. Operating the projector properly enables you
to manage those features and maintains it in good condi-
tion for many years to come.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section in
the back of this booklet. If the problem still persists, con-
tact the dealer where you purchased the projector or the
service center.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
USER’S MANUAL WITH THIS UNIT.
NOTE: This symbol and recycle system are applied
only to EU countries and not applied to the
countries in the other area of the world.
Your SANYO product is designed and manu-
factured with high quality materials and
components which can be recycled and
reused.
This symbol means that electrical and elec-
tronic equipment, at their end-of-life, should
be disposed ofseparatelyfrom your house-
hold waste.
Please dispose of this equipment at your local commu-
nity waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
READ AND KEEP THIS USER’S MANUAL FOR LATER
USE.
Safety Precaution
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
This projector produces intense light from the projec-
tion lens. Do not stare directly into the lens as much
as possible, otherwise eye damage could result. Be
especially careful that children do not stare directly
into the beam.
Install the projector in a proper position. Otherwise it
may result in fire hazard.
Allowing the proper amount of space on the top,
sides, and rear of the projector cabinet is critical for
proper air circulation and cooling of the unit. The di-
mension shown here indicates the minimum space
required.
If the projector is to be built into a compartment or
similarly enclosed, these minimum distances must be
maintained.
Do not cover the ventilation slot on the projector.
Heat build-up can reduce the service life of your
projector, and can also be dangerous.
SIDE and TOP REAR
If the projector is unused for an extended time,
unplug the projector from the power outlet.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the ceil-
ing, clean air intake vents, filters, or top of
the projector periodically with a vacuum
cleaner. If you leave the projector unclean
for a long time, the cooling fans can be
clogged with dust, and it may cause a
breakdown.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN. IF THE PROJECTOR COMES IN
CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.
WARNING:
Not for use in a computer room as defined in the Stan-
dard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Pro-
tection of Electronic Computer/Data Processing
Equipment.