Filter
Top Products
29
Basic Operation
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When the projected
image is captured and is set as User in the Logo selection
(p.53), the screen changes each time you press the NO
SHOW button as follows.
black out a the captured image a normal a • • • • •
Press the P-TIMER button on the remote control. The Timer
display “00 : 00” appears on the screen and starts to count
time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See page 36 for details.
No show disappears after 4 seconds.
4Note:
See the previous page for the description of
other buttons.
IMAGE button
NO SHOW button
P-TIMER button
SCREEN button
Select the screen size (See pages 38-40, 46-47 for details).
Remote Control
4Note:
When use the MUTE button to release the No Show
function, the mute function can not be operated at the
same time.
NO SHOW button
P-TIMER button
IMAGE button
SCREEN button
No Show
P-Timer
3D button
Select 3D mode from 3D Off, 3D(Sync 1), 3D(Sync 2) and
3D VISION. (p.48-49)
3D button
3D Off
3D VISION
3D(Sync 1)
3D(Sync 2)
* The 3D indicator on the control panel emits blue at 3D (Sync 1),
3D(Sync 2) and 3D VISION. (p.48-49)