Sanyo PLC-XU75 Projector User Manual


 
15
InstallationInstallation
15
Connecting to a Computer
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• Audio Cables (Mini Plug: stereo)
(*One cable is supplied; other cables are not supplied
with the projector.)
External Audio Equipment
VGA cable
Audio cable
(stereo)
Audio cable
(stereo)
Monitor Output
or
Monitor Input
Audio Output
COMPUTER/
COMPONENT
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
Monitor Output
COMPUTER IN 1/
COMPONENT IN
VGA cable
This terminal is switchable.
Set up the terminal as either
Computer input or Monitor
output. (See Page 47.)
COMPUTER IN 2/
MONITOR OUT
Note:
• Input sound to the COMPUTER/COMPONENT
AUDIO IN terminal when using the COMPUTER
IN 1/COMPONENT IN and the COMPUTER IN 2/
MONITOR OUT terminal as input.
• When connecting the AUDIO OUT to external
audio equipment, the projector's built-in speaker is
disconnected.
• When the cable is of the longer variety, it
is advisable to use the COMPUTER IN 1/
COMPONENT IN and not the COMPUTER IN 2/
MONITOR OUT.
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.