Sanyo PLC-XU75 Projector User Manual


 
29
Computer Input
Adjust the horizontal area displayed by this projector.
Press the Point 7 8 buttons to decrease/increase the
value.
Display area H
Adjust the vertical area displayed by this projector.
Press the Point 7 8 buttons to decrease/increase the
value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red framed pointer
to the Store item and then press the SELECT button.
Move the red arrow pointer to any of Mode 1 to 5 in
which you want to store and then press the SELECT
button.
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments return to their
previous figures.
Mode free
To clear the stored data, move the red framed pointer
to the Mode free item and then press the SELECT
button. Move the red arrow pointer to the Mode that
you want to clear and then press the SELECT button.
Note:
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected
in the PC System Menu (p.26).
Vacant Mode Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
Close this dialog box.
To store adjusted data
To clear adjusted data
This Mode has stored parameters.
Move the red framed
pointer to an item and
press the SELECT button.
Computer Input
29