Filter
Top Products
34
Computer Input
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message "D. zoom +" is displayed. Press
the SELECT button to expand the image size. And press
the Point ed 7 8 buttons to pan the image. The Panning
function can work only when the image is larger than the
screen size.
A projected image can be also expanded by pressing the
D.ZOOM e button on the remote control.
Digital zoom +
When Digital zoom – is selected, the On-Screen Menu
disappears and the message "D. zoom –" is displayed. Press
the SELECT button to compress image size.
A projected image can be also compressed by pressing the
D.ZOOM d button on the remote control.
To exit the Digital zoom +/– mode, press any button except the
D.ZOOM ed buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size from
the Screen Size Adjustment or select an input source from the
Input Source Selection (p.25) again, or adjust the screen size
with the D.ZOOM ed buttons.
Digital zoom –
For zooming in and out the images
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
✔ Note:
• The panning function may not
operate properly if the stored Mode
in the PC Adjust Menu is used.
(p.29)
• The minimum compression ratio
can be limited depending on the
input signal or when the Keystone
function is working.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i,
575i, 480p, or 575p is selected in
the PC System Menu (p.26).
• Digital zoom +/- cannot be selected
when Full screen or True is selected.