Filter
Top Products
35
Sound Volume Adjustment
Press the VOLUME (+/–) button(s) on the Top Control or on the
Remote Control Unit to adjust the volume. The Volume dialog box
appears on the screen for a few seconds.
(+) button to increase the volume, and (–) button decreasing.
Sound Mute Setting
Press the MUTE button on the Remote Control Unit to cut off the
sound. To restore the sound to its previous level, press the MUTE
button again or press Volume (+/–) button(s).
Indicates the roughly level
of the volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
SOUND ADJUSTMENT
DIRECT OPERATION
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SOUND and press the SELECT (REAR CLICK) button. Another
dialog box SOUND ADJUST Menu will appear.
Move the arrow to ▲ or ▼ of "Volume" by pressing the POINT UP/
DOWN buttons. To increase the volume, point the arrow to ▲ and
then press the SELECT (REAR CLICK) button. To decrease the
volume point the arrow to ▼ and then press the SELECT (REAR
CLICK) button.
To cut off the audio sound, point the arrow to "Mute" and then press
the SELECT (REAR CLICK) button. The Mute display is changed On
from Off and the sound is cut off. To restore the sound to its previous
volume level, set the Mute to Off.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to select by
pressing the POINT UP/DOWN buttons.
1
2
Move the arrow to ▲
or ▼
and press the
SELECT (REAR
CLICK) button.
Indicate the roughly
level of the item.
Move the arrow to
the item and then
press the SELECT
(REAR CLICK)
button.
Close the Sound Menu.
MENU OPERATION
Volume
Mute
To adjust the Treble sound, point the arrow to ▲ or ▼ of "Treble" and
then press the SELECT (REAR CLICK) button.
Treble
To adjust the Bass sound, point the arrow to ▲ or ▼ of "Bass" and
then press the SELECT (REAR CLICK) button.
Bass
Built-in SP.
To disconnect the built-in speaker, point the arrow to Built-in SP. and
then press the SELECT (REAR CLICK) button. The Built-in SP.
display is changed Off from On and Internal speaker is disconnected.
BASIC OPERATION