Sanyo PLC-SW30 Projector User Manual


 
32
Video Input
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
Video System Selection
Press MENU button to display the On-Screen Menu. Press
Point
7 8 buttons to move the red frame pointer to AV System
Menu icon.
Press Point d button to move the red arrow pointer to the
system that you want to select and then press SELECT button.
1
2
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to
the system and press
SELECT button.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video Jack or S-Video Jack
COMPUTER IN / COMPONENT IN Jack ( Y, Pb/Cb, Pr/Cr)
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
Auto
AV System Menu icon
This box indicates the
system being selected.
Move the pointer to the
system and press
SELECT button.
AV SYSTEM Menu icon
This box indicates the
system being selected.