Sanyo PLC-SW30 Projector User Manual


 
34
Video Input
Press Point 7 8 buttons
to adjust value.
Press MENU button to display the On-Screen Menu. Press
Point
7 8 buttons to move the red frame pointer to IMAGE
ADJUST Menu icon.
1
2
Press Point d button to move the red frame pointer to the item
that you want to adjust and then press SELECT button. The
level of each item is displayed. Adjust each level by pressing
Point
7 8 buttons.
Move the red frame point-
er to the item to be select-
ed and then press SELECT
button.
IMAGE ADJUST MENU
Image Level Adjustment
Press Point 7 8 buttons to adjust the image contrast. (From 0 to 63.)
Press Point 7 8 buttons to adjust the image brightness. (From 0 to 63.)
Contrast
Brightness
Press Point 7 8 buttons to obtain better balance of contrast. (From 0
to 15.)
Gamma
Press SELECT button at this
icon to display other items.
Image Adjust
Menu
Press Point 7 8 buttons
to adjust value.
Press Point 7 8 buttons to adjust color intensity. (From 0 to 63.)
Press Point 7 8 buttons to obtain proper color. (From 0 to 63.)
Color
Tint
Press Point 7 8 buttons to adjust the image sharpness. (From 0 to 15.)
Sharpness
Press Point 7 8 buttons to adjust the red tone. (From 0 to 63.)
White balance (Red)
Press Point 7 8 buttons to adjust the green tone. (From 0 to 63.)
White balance (Green)
Press Point 7 8 buttons to adjust the blue tone. (From 0 to 63.)
White balance (Blue)
NOTE : Tint cannot be adjusted when the video
system is PAL, SECAM, PAL-M or PAL-
N.
Press SELECT button at this icon
to store the value.
Press Point 7 8 buttons to select the Color temp. level that you
want to select. (XLow, Low, Mid, or High)
Color temp.