Filter
Top Products
MONITOR OUT
RESET
R/C JACK
R–AUDIO–L
VIDEO
RGBHV
12
CONNECTING THE PROJECTOR
Connect an external audio
amplifier to these jacks.
(Refer to P13, 14.)
AUDIO OUTPUT JACKS
This projector uses a micro processor to control the
unit. Occasionally, the micro processor may
malfunction and need to be reset. This can be done
by pressing the RESET button with a pen, which will
shut down and restart the unit. Do not use the
RESET function excessively.
RESET BUTTON
When using the Wired / Wireless
Remote Control Unit as the Wired
Remote Control, Connect the Wired
Remote Control Unit to this jack with
the Remote Control Cable (supplied).
(Refer to page 17.)
R/C JACK
COMPUTER MONITOR OUTPUT
JACKS (BNC x 5)
These jacks output the signal from
the COMPUTER INPUT terminals
(except the digital input signal).
Connect an external monitor to
these jacks. (Refer to P14.)
VIDEO MONITOR OUTPUT JACK
This terminal outputs the composite video
signal or the signal from the S-VIDEO
INPUT JACK. Connect an external
monitor to this jack. (Refer to P13.)
OUTPUT TERMINALS