Sanyo PLC-XP30 Projector User Manual


 
27
COMPUTER MODE
The number of the total vertical lines. Adjust the number to match
the image of your personal computer.
Total lines
Recalls the parameter data that was previously
adjusted.
Reset
Stores the parameters in the memory.
Stored
Clears the parameter data previously set.
Mode free
Closes PC ADJUST MENU.
Quit
The number of the total dots in one horizontal period. Adjust the
number to match the image of your computer.
Total dots
Adjustment of the horizontal or vertical picture position. When the
image is not centered on the screen, adjust each of those items.
Horizontal / Vertical
Adjustment of the clamp level. When the image has a dark bar(s),
try this adjustment.
Clamp
Adjustment of the area displayed with this projector. Select the
resolution at the Display area dialog box, or adjust the number at the
column of H or V to match the resolution of the image.
Display area
Adjustment of the horizontal height or vertical width of the image.
Horizontal Scale / Vertical Scale
Each of the keys operates as follow.
Press the SELECT button at this
column to adjust Clamp, Fine
sync, Display area, Horiz.
scale or Vert. scale .
Adjust the picture as necessary to eliminate flicker from the display.
Fine sync
NOTE : The Display area, the Horiz. scale and the Vert. scale
cannot be adjusted when HDTV1035i or HDTV1080i is
selected on SYSTEM MENU (P24 and 25).
Point the arrow at the Display area and press
the SELECT button. The Display area dialog
box appears.