Sanyo PLC-XP30 Projector User Manual


 
15
MODE
MENU
SELECT
NORMALAUTO IMAGE
LENS SHIFT VOLUMEFOCUSZOOM
ON-OFF
LAMP
REPLACE
WARNING
TEMP.
LAMP
READY
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to adjust zoom. (P21)
Used to open or close the
MENU operation. (P18, 19)
MENU BUTTON MODE BUTTON
READY INDICATOR
POWER ONOFF BUTTON
FOCUS BUTTONS
VOLUME BUTTONS
WARNING TEMP. INDICATOR
LAMP INDICATOR
LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P24, 32)
Used to operate AUTO
IMAGE function. (P29)
Used to adjust focus. (P21)
This indicator lights green
when the projector is ready
to be turned on. And it
flashes green in Power
Management mode. (P36)
This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.
This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P40)
This indicator flashes red
when internal projector
temperature is too high.
(P39)
Used to adjust volume.
(P23)
Used to reset to normal
picture adjustment preset
by factory. (P29, 35)
Used to select an item or
adjust the value in the MENU.
It is also used to pan the image
in DIGITAL ZOOM mode.
(P31)
Used to execute the item
selected.
It is also used to
expand the image in DIGITAL
ZOOM mode. (P31)
Used to turn the projector
on or off. (P20)
ZOOM BUTTONS
Used to adjust lens shift.
(P21)
AUTO IMAGE BUTTON
SELECT BUTTON NORMAL BUTTON
POINT BUTTONS
LENS SHIFT BUTTONS
INDICATORS
TOP CONTROL