Sanyo POA-PN02 Network Card User Manual


 
101
Network Unit
OWNER’S MANUAL
ENGLISH
Specifications
Product specification
Type ......................................PJ-Net Organizer (Network Unit)
LAN interface........................Applicant regulation IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX)
Data transfer speed 10Mbps/100Mbps
data transfer mode Half duplex/Full Duplex
Terminal 8-pin modular (RJ-45)
Network protocol ..................TCP/IP specification TCP/IP
Serial interface ......................RS-232C
Baud rate 0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps
Flow control Hardware flow control (RTS/CTS, Xon/Xoff)
Parity check Odd/Even
Terminal D sub 9-pin Male
Power source........................Supplied from the projector
Power consumption..............3.0 watts
Dimensions (W x H x D)........5.20” x 1.32” x 4.13” (132 x 33.6 x 105mm)
Weight ..................................0.57 lbs (258 g)
Built-in battery ......................Lithium battery, Type CR2032, 3.0V
Operating temperature..........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature ............14˚F ~ 140˚F (-10˚C ~ 60˚C)
* The specifications are subject to change without notice.
The CE Mark is a Directive conformity mark of the European Community
(EC).