Sanyo POA-PN02 Network Card User Manual


 
83
Network Unit
OWNER’S MANUAL
ENGLISH
Load and apply the setting value
The control sets saved for each projector ( p.54) can be used while the multi-con-
trolled projectors function is being used. Select a setting number from the item Load
Setting No. with the pull-down menu button and then click Set button. The control
values stored with selected set number for each projector will be applied to the indi-
vidual projector assigned to that set. The control values will not be applied to all of
the projectors under the multi-control.
Control
Display the control page by clicking on Multi Control on
the multi-control page. The setting pages are construct-
ed from 1 to 6 page and each item is indicated on the
next page.
Control