Sanyo POA-PN02 Network Card User Manual


 
45
Network Unit
OWNER’S MANUAL
ENGLISH
Image Adjustment
This function is to adjust the projected picture image and set the image
mode. For selection of image mode, select a desired image mode with the
Image pull-down menu button and then click Set button. The setting items
are switched automatically according to selected input mode, computer or video
input. To change the setting of each page, click Set button on each page. When click-
ing Reset button, all of the contents of the pages are reset.
* Some control items can not be used depending on the selecting input mode or functions of
the projector you use. In this case, the values of those items are indicated with “---”.
Item Description
Image ..................Selects image mode among
the Standard, Real*, Cinema**,
Image1 to Image4 with pull-
down button menu . Image1 to
4 are user preset mode.
Original Mode ........Displays which predefined
image adjustment mode is
based upon.
Adjustment
items..................
Contrast, Brightness, Color, Tint
* This item is only available in the computer input
mode.
** This item is only available in the video input mode.
Item Description
White Balance
Color Temp.......Sets a color temperature
mode.
Red, green,
Blue ................Adjusts a white balance
respectively.
Item Description
Sharpness..........Adjusts picture sharpness.
Gamma..............Adjusts brightness of darker
part of the picture.
Noise
Reduction ..........Switches noise reduction
on/off.
Progressive Scan....Switches progressive mode.
Auto Picture
Control ................Adjusts picture quality automat-
ically.
Save Adjustment ....Select a mode to store the
image adjustment values.
Control the projector