Sanyo POA-PN02 Network Card User Manual


 
16
Chapter 2 Installation
x Installation and Network configuration
Mounting
The AC cord must be disconnected when mounting or removing this product otherwise it
may damage the product.
Do not connect the AC cord until after connecting the LAN cable and computer.
Caution
!
1 Disconnect the AC plug from the
projector.
2 Remove the connector cover
and screw covers from the pro-
jector and insert plug on this
product to the option connector.
3 Tighten two screws by using a
coin etc.
Connector cover
Screw cover