E-mail Setting
This product has an E-mail function which can send an alert message to users or an
administrator
if it detects an abnormality on the monitor or when the panel usage time
reaches
to setting time. Press the E-Mail Setting button on the main menu and follow the
below steps.
1 E-mail Setting
Select "E-mail Setting" of sub menu, type below items, and press the Set button for set-
ting.
1-1 SMTP Server
*
1
Type the address of SMTP server for E-mail.
1-2 Administrator Address
Type
the E-mail address of administrator. This address is set to "Reply-To" address sent
from the monitor.
1-3 Registering and deleting E-mail addresses
Type the E-mail address to which an alert message is sent.
26
Basic Setting and Operation
*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have
this SMTP server address.
✐ To use the E-Mail function, it must be set the DNS address on the Network Setting page correctly.
✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net-
work environment. If the SMTP server is located in your LAN (Local Area network), the address set
to SMTP server should be specified the in SMTP server located in your LAN. The server located
outside of your LAN may not be available for security reason. For further information please contact
your network administrator.