Filter
Top Products
44
Appendix
Examples of Connection
Direct connection
Connect the monitor (LCD01) to the control computer (PC05) directly.
Monitor Name: LCD01
IP Address : 192.168.0.2
Subnet Mas
k : 255.255.255.0
De
fault Gateway : 0.0.0.0
DN
S : 0.0.0.0
Computer Name: PC10
IP Address : 192.168.0.10
Subnet Mas
k : 255.255.255.0
De
fault Gateway :
DN
S :
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mas
k : 255.255.255.0
De
fault Gateway :
DN
S :
Hub
Monitor Name: LCD01
IP Address : 192.168.0.2
Subnet Mas
k : 255.255.255.0
De
fault Gateway : 0.0.0.0
DN
S : 0.0.0.0
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mas
k : 255.255.255.0
De
fault Gateway :
DN
S :
Connect the monitor (LCD01) to the control computer (PC05) via the hub.
✐ When the monitor is connected to the computer directly without hub, the UTP cross cable
should be used .
* UTP cross cable
UTP straight cable