Filter
Top Products
6
ALARM SETTING
ALARM IN
·ALARM OUT
MOTION
uAREA
1 y
NO
OFF
SET y
CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
·ALARM
PASSWORD
LANGUAGE
OPTION
PRESET
MENU
SET y
1 y
SEQ y
SET y
SET y
SET y
SET y
SET y
OFF
END
ALARM SETTING
·ALARM IN
ALARM OUT
MOTION
uAREA
uSENSITIVITY
ZOOM
uZOOM TIME
DURATION
ALARM SIGN
PRESET
MENU
1 y
NO
OFF
SET y
SET y
OFF
5S
5S
OFF
OFF
BACK
~
~
GND
+
–
CAT5(+)
CAT5(–)
485 (A)
485 (B)
GND
1
For details, see “Specifying Alarm Input” in the INSTRUCTION MANUAL.
b With Alarm Input 1 (“1” is selected)
b With Alarm Input 2 (“2” is selected)
Alarm
input signal
Alarm
input signal
Alarm Signal Input
If a lamp is connected to this cable, it will light up when an alarm signal is received or when the
built-in motion sensor detects movement.
Alarm Signal Output
b With AC 24 V
Power Supply Connection
b With DC 12 V
Check that +/- polarity is correct.
For the connections, use cables thicker than 18 AWG.
For the connections, use cables thicker than 18 AWG.
Connection for a communication
device for remote operation
Receiver
Controller
To prevent electromagnetic
interference
• On the cable for power supply
Be sure to attach the supplied
clamping core to the cables as
illustrated.
L5BM2_XE(INSTALLATION).book 6 ページ ２００６年７月６日 木曜日 午後２時２４分