Filter
Top Products
DR300 Quick Guide Pg 10
Media Loading
Setting of Label and Carbon Ribbon
Setting paper
Use of genuine SATO labels for this equipment is recommended.
Rolled Label
Setting Rolled Paper
DR300 Quick Guide Pg 23
Daily Maintenance
This equipment is for printing information in the form of bar code and character. Periodical
preventive maintenance is recommended to keep the printer in good condition.
Timing for maintenance
• Thermal head, platen roller.
After printing every one roll or 150m of label.
• Others.
After printing every 6 rolls or 900m of label.
Caution for maintenance
(Take following caution in maintenance work)
• The above recommended cleaning frequency is only a guide. Do carry out any
cleaning where dirt or dust has gathered.
• Use applicator and cotton cloth for cleaning each component. Avoid metallic tools to
prevent damage to printer parts especially print head.
• Ensure that power is switched off before performing any printing.
Maintenance Method
• Printer cleaning kit.
A cleaning kit is available from SATO.
This contains:
1) Solvent wipes (for print head)
2) Multi purpose wipes
3) Air duster
This will help to keep your printer in good working condition.