DR300 Quick Guide Pg 28
Label Size Width 32 -80 mm Pitch 19 – 181 mm
(Label size is inclusive of label web)
Label Thickness 0.1 – 0.26 mm
Operation Panel Key: LINE Key, FEED Key
LCD: 8 digits x 2 lines (English character display, Black Lit)
(only applicable to On-line use)
STATUS: 2 – colour LED (Red, Green)
Adjustment VR PRINT : Print Darkness
PITCH : Print Pitch
OFFSET : Print Offset
User Mode 1. Print Darkness
2. Print Position Adjustment
3. Print Speed
4. Offset Adjustment
Features Graphics Print, Sequential Numbering, Line/Box, Print Position
Adjustment, Back – Feed, Tear – Off, Calendar, Inverse Image, Zero
Slash Selection, Non Standard Code Setting, Hex Dump,
Customized Design Character (16 x 16, 24 x 24 dots)
Self
Check/Detection
Head Element Broken, Paper End, Ribbon End, Head Open,
Memory Card Error, Test Print
Option Touch Screen Unit, Cutter Unit, Dispenser Unit, PC Card (JEIDA
Type II), Scanner, cut Ticket/Tag Receiver, Full Qwerty Keyboard,
Rewind Unit.
Label & Carbon Ribbon Specification
Size Min. W32 mm – Max W80 mm (incl. of label web)
Min. P19 mm – Max W181 mm (incl. of label web)
Thickness 0.1 mm – 0.26 mm
Type Rolled Paper
Label
Diameter Max. outer diameter : 250 mm
Type Wax, Wax/Resin
Length 300m/roll
Width Max. 84 mm
Carbon
Ribbon
Winding Face-in type
DR300 Quick Guide Pg 5
Accessories Checklist
When the box is opened, confirm if the following accessories are included. If anything is
found short, the sales outlet or the dealer from where you purchased.
Cleaning
Sheet