CT4xx Series Quick Guide Pg 13
Options
Label Cutter
This is an internal option allowing labels to be cut at specified intervals. Controlled
through programming. Factory installed only.
Bar Code SATO Electronics (S) Pte Ltd
438A Alexandra Road
Label Dispenser
#05-01/02 Alexandra Technopark
Singapore 119967
Another internal option allowing labels to be peeled from backing for immediate (on
demand) application. Factory installed only.
Tel : (65) 6271 5300
Fax : (65) 6273 6011
Service Hotline : (65) 6273 6455
Label Rewinder
Email : sales@satosingapore.com
An external accessory that rewinds labels onto a roll after they are printed.
Website : www.satosingapore.com
Serial Interface
© Copyright 2001, 2011
Bar Code SATO Electronics (S) Pte Ltd
High Speed RS232 interface option, 9600 to 57.6 Kbytes. Factory installed only.
Ethernet Interface
TCP/IP Protocol Interface option. Factory installed only.
USB Interface
Warning : This equipment complies with the requirements in Part 15 of FCC rules for
a Class A computing device. Operation of this equipment in a residential area may
cause unacceptable interference to radio and TV reception requiring the operator to
take whatever steps necessary to correct the interference.
Universal Serial Bus Interface option. Factory installed only.
Coax/Twinax Interface
External Coax/Twinax I/F interface accessory. All rights reserved. No part of this document may be reproduced or issued to third
parties in any form whatsoever without the express permission of Bar Code SATO
Electronics (S) Pte Ltd. The materials in this document are provided for general
information and are subject to change without notice. Bar Code SATO Electronics
(S) Pte Ltd assumes no responsibilities for any errors that may appear
Coax I/F emulates an IBM3287-2 printer with a standard Type A BNC connector.
Twinax I/F emulates IBM 5224, 5225 or 4214 printers with auto-terminate / cable-
thru capabilities.
WARNING
BEFORE CONNECTING A PRINTER TO ANY POWER
SOURCE, ENSURE IT WAS FACTORY CONFIGURED
FOR THE APPROPRIATE VOLTAGE.
Copyright (C) 2011 SATO America, Inc.
704-644-1660 Technical Support