Filter
Top Products
Troubleshooting
95
8
Sending the data to the delivery server has
been failed.
To confirm the result, check [Scanned Files Sta-
tus].
While sending a file to the delivery server, a
network error has occurred and the file could
not be sent correctly. Try the operation once
more.
If the message is still shown, the network may
be crowded. Notify the network administra-
tor.
If multiple files were sent, use the Scanned
Files Status screen to check for which file the
problem occurred. ⇒ p.62 “Checking the Sta-
tus of Delivery”
Sending the data to the delivery server has
failed.
The data will be resent later.
A network error has occurred and a file was
not sent correctly to the delivery server. Wait
until delivery is retried automatically after the
preset interval. If the delivery fails again, noti-
fy the network administrator.
Specified SMTP server is not set correctly.
Sending E-mail has been cancelled.
Check whether the “Network” setting for the
initial system setup is correct.
Switching. Please wait. No destinations can be specified until after the
switching is completed.
The destination list has been updated.
Specified destination(s) or sender's name has
been cleared.
A specified destination or sender's name was
cleared when the destination list in the deliv-
ery server was updated.
Specify the destination or sender's name
again.
The password entered is not correct. Try again. Enter the password again.
The selected files contain the file deleted.
Check the stored files status.
After the files were selected, some files were
deleted with DeskTopBinder V2 Lite/Profes-
sional. Perform the selection process again.
The specified group contains some user(s)
who do not have E-mail addresses.
Are you sure you want to send E-mail only to
the user(s) who have addresses?
The group contains members whose e-mail
addresses are not registered. Please check the
e-mail addresses of the group and repeat the
selection.
Transmission has been failed.
Insufficient memory in the delivery server.
There is not enough free space on the hard
disk of the delivery server. Free up the re-
quired amount.
Updating the destination list. Please wait.
Specified destination(s) or sender's name has
been cleared.
If a destination or sender's name was already
selected, re-select it after this display is
cleared.
Updating the destination list has failed.
Try again?
Check whether the delivery server has started
operation.
Message Possible Cause and Action