Filter
Top Products
Auto Cycle—Printing From Several Originals At Once
25
1
Auto Cycle—Printing From Several
Originals At Once
Use the {
Auto Cycle
} key to process
masters and make prints at one
stroke.
Note
❒ When you use the optional docu-
ment feeder, it is not necessary to
place originals one by one. All
originals are fed and prints are
completed after you press the
{
Print
} key.
❒ If you use the optional tape dis-
penser, the tape dispenser drops a
strip of paper onto the top of the
paper stack after the last page of
each printing set is fed out to the
paper delivery table. This marks
the end of each printing group.
A
Set the original on the exposure
glass or in the optional document
feeder.
Note
❒ You can set up to 30 originals
into the optional document
feeder.
B
Enter the number of prints re-
quired with the {
{{
{
Number
}
}}
} keys.
C
Press the {
{{
{
Start
}
}}
} key.
D
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position
} keys (see ⇒ P.8 “Shift-
ing The Print Image Position For-
ward Or Backward”) or the side
table fine adjusting dial (see ⇒
P.8 “Shifting The Print Image Po-
sition To The Right Or Left”).
E
Press the {
{{
{
Auto Cycle
}
}}
} key.
Note
❒ If you press the {
Auto Cycle
}
key, you cannot make proof
prints by pressing the {
Proof
}
key.
TSLS011N
TSLS012N
TSLS01GN