Filter
Top Products
Printing Using The Optional 30 Originals Document Feeder
45
2
D
Press the {
{{
{
Start
}
}}
} key.
E
Check the image position of the trial or proof print.
Note
❒ If the image position is not correct, adjust it using the {
Image Position
} keys
(see ⇒ P.8 “Shifting The Print Image Position Forward Or Backward”) or the
side table fine adjusting dial (see ⇒ P.8 “Shifting The Print Image Position To
The Right Or Left”).
❒ After the first original is on the master, the second original is fed.
❒ If you set only one original, the beeper sounds after the first original is on
the master. Set the second original and the desired image settings. Then,
press the {
Start
} key.
F
Enter the number of prints with the {
{{
{
Number
}
}}
} keys.
G
Make your prints.
Memory Mode With The Document Feeder
Note
❒ To prevent original misfeeds, do not set originals of different sizes.
❒ Do not set more than 30 originals at one time in the optional 30 originals doc-
ument feeder.
TSLS012N
TSLS011N