Filter
Top Products
OPTIONAL FUNCTIONS
102
2
a, b, c = 2 mm, 0.08"
When using the closed area method
Note
❒
The line designating the area must be a closed loop.
A Put the command sheet on top of the original.
B Using a black, red, or blue felt tip pen, draw a line around the area to des-
ignate. The line should have a thickness of at least 1 mm.
Note
❒
Make sure there is no break in the line.
❒
Draw the line at least 2 mm, 0.08", away from the image so that the com-
plete image can be recognized.
c
a
b
GRCOMM2E
ZM-20
ZM-26