Filter
Top Products
Troubleshooting
74
4
Error Messages
The following messages may appear while you are operating or programming
the machine.
Message Problem/Solution
No Files Exist No polling reception operations have been programmed.
There are no documents in memory waiting for transmis-
sion.
Incorrect file number. Check the file number and try again.
Cannot Combine : (currently se-
lected function)
Appears when you attempt to select a function that cannot
be used in combination with another currently selected
function.
This Key is in Use as a Group Dial This Quick Dial Key has a Group stored in it.
This Key is in Use as a Program This Quick Dial Key has a Keystroke Program stored in it.
This Key is in Use as a Quick Dial This Quick Dial Key has a Quick Dial stored in it.
This Key is Not Programmed Either:
• This Quick Dial Key does not contain a number.
• This Quick Dial Key does not contain a Keystroke Pro-
gram.
This Speed Dial No. is Not Pro-
grammed
This Speed Dial number does not contain a number.
This Dest. is Already Selected Either:
• This number is already included in this Group.
• The same destination was specified more than once.
Insert Pause “-” After Area Code You must add a pause after your area code when you input
your fax terminal's own telephone number.
Replace Toner The toner cassette is empty. Install a new cassette.
Clear Misfed Original(s) A document is jammed in the feeder.
Clear Misfed Paper Paper is jammed in the printer.
Close Front/Right Cover A cover is not closed properly. Check that all covers are
closed.
Machine is in Use. Please Wait Machine cannot print a list/file, because the plotter is not
ready.
Call Service Machine is out of order. Contact your service representa-
tive.
Check Paper Size. Press OK to
Correct.
The size of the installed paper does not match the currently
selected paper size.
Press the
{
{{
{OK}
}}
}
key, and then set the paper size or install the
appropriate paper.
StellaF1EN-3_FM.book Page 74 Monday, November 12, 2001 11:38 AM