Savin 4035e All in One Printer User Manual


 
Specifications
112
5
When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
During copying, the image is shifted to allow for the binding margin.
The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5L, 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL
v Combine
In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
The reproduction ratios you can specify are 25–400%.
If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with some ratios, parts of the
image might not be copied.
You cannot use custom size paper.
If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
If the number of originals placed is less than the number specified for com-
bining, the last page segment is left blank as shown.
v Booklet/Magazine
The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.
The reproduction ratios you can specify are 25–400%.
If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with some ratios, parts of the
image might not be copied.
If the orientation of originals is different from that of the copy paper, the ma-
chine will automatically rotate the image by 90
°
to make copies properly.
You cannot copy with originals different in size and orientation.
If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
In Magazine mode, the copying may take some time after scanning origi-
nals.
When the optional booklet finisher is installed, if you select Saddle Stitch
function in Magazine mode, the machine staples and folds the paper in the
centre, then delivers the paper folded.