Filter
Top Products
Supplementary Information
113
5
v Image Repeat
Depending on the paper size, ratio, and orientation, parts of repeated images
may not be copied.
v Centring
Though the original is set to a different orientation from the paper loaded, the
machine will not rotate the image by 90° (Rotate copy).
v Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted:
•Metric version
•Inch version
v Margin Adjustment
• If you set a binding margin that is too wide, part of the image may not be
copied.
• When making copies in Combine mode, the binding margin is added to
the copies after the combination is finished.
v Background Numbering
The numbers appear to overlap the copied image in some cases.
v Preset Stamp
• You can change the size and density of the stamp with User Tools. De-
pending on the setting, density may change.
• Depending on paper size, if you change the stamp size, parts of the stamp
might not be printed.
v Date Stamp
When using Combine mode, the date stamp is printed as follows:
Where original is placed Paper size and orientation
Exposure glass A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 8
1
/
2
"
× 13"L
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 8
1
/
2
"
× 13"L
Where original is placed Paper size and orientation
Exposure glass 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL
ADF 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL, 10" ×
14"L, 5
1
/
2
" × 8
1
/
2
"L
GCDATE2E
15/12/2003