Filter
Top Products
Combined Function Operations
6
1
11.
{Start} key
Press to start copying. The default setting
is for the originals to be scanned first, and
then copied. You can also use this key to
resume an interrupted copy job (Restart
Copy) or repeat a copy job (Repeat
Copy).
12.
Operation Switch
Use this to turn the power on or off. The
power indicator is lit when the power is
on.
13.
Main power indicator
Light up when the main power switch is
set to on.
14.
{Scanner Stop} key
Press this key if originals are fed at a
slant, or if you want to cancel scanning
while an original is being fed into the ma-
chine.
You can also use this to release the paper
edge hold function.
Note
❒ If [Rear: Edge Hold] is selected for
"Original Output Tray" in System Set-
tings, when the originals are output to
the rear of the machine, the originals
are held after they have been scanned.
You can use the {Scanner Stop} key to
release this paper edge hold function.
❒ You can change the original output
tray setting in User Tools. See p.20
“Original Output Tray”
DolphinGB-Syst-F_V4_FM.book Page 6 Wednesday, May 2, 2001 1:19 PM