Filter
Top Products
Combined Function Operations
8
1
Using the Machine as a Copier
Switching to Copier Mode
When the printer or scanner function is not using, or finished, the copier screen
to be displayed normally.
Reference
For details about using the copier functions, see the Copy Reference manual.
Interrupting Other Functions to Use Copier Functions
You can interrupt a copy job, or another function job, and switch to the copier
function. This is called "Interrupt Copy."
Limitation
❒ You cannot use the following functions with the interrupt copy function.
• Edit Image
• Stamp
• Sort/Rotate sort
• Erase
Reference
For details on using interrupt copy during a copy job, see "Interrupt Copy" in
the Copy Reference manual.
A
Press the
{
Interrupt
}
key while an original is being scanned or while a job is being
copied. When printing, place your originals after pressing the
{
Interrupt
}
key.
The Interrupt copier screen is displayed.
B
Set your desired settings, and make the copies.
C
When copying has finished, remove the originals and the copy output of
the interrupt copy job.
D
Press the {Interrupt} key.
DolphinGB-Syst-F_V4_FM.book Page 8 Wednesday, May 2, 2001 1:19 PM