Filter
Top Products
61
5. Troubleshooting
If Something Goes Wrong
If you have problems with your copier, consult the following pages. If a service
indicator lights up, read the following section. If the original or copy is stuck in
the copier; ⇒ P.62; if the copier won't start, or if copies don't look right, ⇒ P.70.
If Indicator Lights Up
If one of the indicators shown appears on the operation panel, turn to the appro-
priate page and follow the instructions described there.
What appears What it means What to do
x The original or copy paper is
jammed somewhere.
See the following section.
L The copier needs a technician. Call your service representa-
tive.
M A cover ,unit, or the fusing
unit cover was left open.
Close it. Press firmly.
C The paper roll is finished. Put in a new roll of paper.
⇒
P.54.
D The toner cartridge is empty,
or almost empty.
Replace the toner cartridge.
⇒
P.48.
c Wait until the ready indicator
lights.
Wait. If it stays on for an unu-
sually long time, call your
service representative.
E The used toner bottle is full. Empty the used toner bottle.
⇒
P.45.