Filter
Top Products
Appendix F—Connecting Third Party Devices to the Power Server 63230-216-207/A3
9/2002
© 2002 Schneider Electric All Rights Reserved
50
11. Click the Power Server icon on the bottom right of your taskbar.
The Power Server Embedded Switch dialog displays.
12. Click the Setup Mode button to change to setup mode.
After changing to setup mode, your NetMeeting session will be
disconnected while the Power Server restarts automatically. This process
may take up to two minutes.
13. Reconnect to the Power Server with NetMeeting.
14. Press Ctrl-W to display the Power Server desktop.
The Power Server icon displays red indicating it is in setup mode.
NOTE: Some third party device installations may be configured to
execute automatically with no interaction on your part. Check with your
field sales representative to see if this is the case. If so, skip to step 23.
Power Server icon