Filter
Top Products
Appendix H—Database Backup 63230-216-207/A3
Backing Up the Database on the Power Server 9/2002
© 2002 Schneider Electric All Rights Reserved
58
The web page displays “Job command sent” and the Power Server starts
backing up the database on the Power Server.
Checking the Database Backup Status To check the status of the database backup, follow these steps:
1. Type http://Power Server IP/ to browse the main Power Server user
interface (using the IP address of the Power Server for “Power Server
IP”).
2. Click the Maintenance tab.
The Maintenance page displays.
3. Click the Diagnostics button.
The Diagnostics page displays.
4. Select Database Statistics from the list on the left side of the page.
The Power Server Database Statistics page displays.
“Executing” displays in the Status column while the database backup is
in progress.
Once the database is backed up, the Status column will display “IDLE”
with an updated date/time stamp.
NOTE: The Database Statistics page does not refresh automatically. To
refresh the page, click Database Statistics in the list again.
“Executing” displays in
the Status column while
the database backup is
in progress.