Filter
Top Products
63230-216-207/A3 Chapter 3—Installation
9/2002 Dimensions
5
© 2002 Schneider Electric All Rights Reserved
CHAPTER 3—INSTALLATION
DIMENSIONS
Figure 3–1: Power Server dimensional drawing
MOUNTING The Power Server is designed to be mounted directly on a 1.38 in (35 mm)
DIN rail. The unit has a snap-on DIN rail connector on the back (see
Figure 3–2). No tools are required. Mount the Power Server in a clean, dry,
well ventilated area. Allow 15.75 in (400 mm) on the DIN rail for mounting the
Power Server and power supply. Also, allow 3 in (76 mm) clearance above
the Power Server for heat ventilation.
Figure 3–2: Power Server rear view showing DIN rail connection
8.98 in
228 mm
5.63 in
143 mm
3.62 in
92 mm
30703001
Rear view DIN rail
connector location
30703002