Filter
Top Products
4004041 Rev A WebSTAR DPX2203 or EPX2203 VoIP Cable Modem User’s Guide 25
Internet Service: Install USB Drivers, Continued
Microsoft Windows XP
Follow these steps to install the WebSTAR cable modem USB drivers for Microsoft
Windows XP environments.
1. Insert the USB Cable Modem Driver Installation Disk into the CD-ROM
drive of your PC.
2. Wait until the POWER and CABLE lights on the cable modem appear solid
green; then, plug the USB cable into the USB port on your PC.
Result: The Found New Hardware Wizard window opens.
3. In the Found New Hardware Wizard window, select Install from a list or
specific location (Advanced), then click Next.
4. In the Found New Hardware Wizard window, select Search removable
media (floppy, CD-ROM), and then click Next.
Result: The Hardware Installation window opens.
5. In the Hardware Installation window, click Continue Anyway to continue the
installation.
Result: The Found New Hardware Wizard window reopens with a message
that the installation has finished.
6. Click Finish to close the Found New Hardware Wizard window.
Result: The USB drivers are installed on your PC and your cable modem is
ready for use.
Note: If you cannot access the Internet, contact your cable service provider
for further assistance.