Filter
Top Products
SEAGATE 1200 SSD PRODUCT MANUAL, REV. A 10
4.0 PERFORMANCE CHARACTERISTICS
This section provides detailed information concerning performance-related characteristics and features of Seagate 1200
SSD drives.
4.1 INTERNAL DRIVE CHARACTERISTICS
Flash Memory Type NAND MLC
Emulated LBA Size 512, 520, 524, 528, 4096, 4160, 4192 or 4224
Native Programmable
Page Size 8192 User Bytes
Map Unit Size 4096
Default Transfer
Alignment Offset 0
4.2 PERFORMANCE CHARACTERISTICS
4.2.1 Response time
Response time measurements are taken with nominal power at 25°C ambient temperature. The typical values in the table
below are defined as follows:
• Page-to-page response time is an average of all possible page-to-page accesses for a sequentially preconditioned
drive.
• Average response time is a true statistical random average of at least 5000 measurements of accesses between pro-
grammable pages on a randomly preconditioned drive.
Table 2 Typical Response Time (μsec)
ALL CAPACITIES
1
,
2
1. Execution time measured from receipt of the Command to the Response.
2. Assumes no errors.
3. Typical response times are measured under nominal conditions of temperature and voltage as measured on a representative
sample of drives.
These drives are designed to provide the highest possible performance under typical conditions. How-
ever, due to the nature of Flash memory technologies there are many factors that can result in
values different than those stated in this specification
2.
READ WRITE
Average
Typical
3
192 45
Page to Page 39 44
Average Latency 183 13