Filter
Top Products
SEAGATE 1200 SSD PRODUCT MANUAL, REV. A 21
5.3.6.2.5 Abort
There are several ways to abort a diagnostic. Applications can use a SCSI Bus Reset or a Bus Device Reset message to
abort the diagnostic.
Applications can abort a DST executing in background mode by using the abort code in the DST Function Code field. This
will cause a 01 (self-test aborted by the application client) code to appear in the self-test results values log. All other abort
mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition).
5.3.7 Product warranty
See “Seagate Technology Support Services” on page 1 for warranty information.
Warranty terms will vary based on type of warranty chosen: “Managed Life Warranty” or “Limited Warranty with Media
Usage”. Consult the Seagate sales representative for warranty terms and conditions.
Managed Life
This warranty is term based and includes the Lifetime Endurance Management feature stated in section 6.2.6.
Limited Warranty with Media Usage
This warranty is based on the shorter of term and endurance usage of the drive.
Shipping
When transporting or shipping a drive, use only a Seagate-approved container. Keep the original box. Seagate approved
containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids
the drive warranty.
Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in transit. Contact the
authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier
experienced in handling computer equipment.
Product repair and return information
Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction
any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.
Storage
The maximum recommended storage period for the drive in a non-operational environment is 90 days. Drives should be
stored in the original unopened Seagate shipping packaging when ever possible. Once the drive is removed from the
Seagate original packaging the recommended maximum period between drive operation cycles is 30 days. During any
storage period the drive non-operational temperature, humidity, wet bulb, atmospheric conditions, shock, vibration, magnetic
and electrical field specifications should be followed.