Filter
Top Products
Barracuda ATA Family Installation Guide, Rev. A 7
Note. You can mount the drive in any orientation. Usually it is
mounted with the circuit board down.
Caution. Do not overtighten the screws or use metric
screws. This may damage the drive.
Figure 3. Mounting the drive
3. Secure the drive in the computer using four 6-32 UNC
mounting screws in either the side-mounting or bottom-
mounting holes. Insert the screws no more than 0.22 inch
(5.58 mm) into the bottom-mounting holes and no more than
0.20 inch (5.0 mm) into the side-mounting holes.
!