Filter
Top Products
SV35 Series SATA Product Manual, Rev. B
9
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Altitude, nonoperating
(meters below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft to 40,000+ ft)
Shock, operating (max at 2 msec) 63 Gs
Shock, nonoperating (max at 2 msec) 350 Gs
Vibration, operating 5-22 Hz: 0.25 Gs, Limited displacement
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
Vibration, nonoperating 5-22 Hz: 0.25 Gs, Limited displacement
23-350 Hz: 5.0 Gs
351-500 Hz: 1.0 Gs
Drive acoustics, sound power (bels)
Idle** (bels) 2.48 (typical)
2.64 (max)
Operational, DVR seeks (bels) 2.53 (typical)
2.62 (max)
Nonrecoverable read errors 1 per 10
14
bits read
Annualized Failure Rate (AFR) <1%
Warranty 5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to
access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be
asked to provide the drive serial number, model number (or part num-
ber) and country of purchase. The system will display the warranty infor-
mation for your drive.
Contact start-stop cycles
(25°C, 50% relative humidity)
50,000
Supports Hotplug operation per SATA II
specification
Yes
Table 3: Drive specifications for 160 Gbyte models
Drive specification ST3160212SCE